PRTG for Android brings the power of the PRTG Network Monitor interface to your Android 4.0+ devices. It requires a PRTG 14.1 or higher installation. If you encounter any bugs, please send them to support@paessler.com, as we're not notified of new comments.
Features include:
• Full visibility into the state of your probes, groups, devices, sensors, and channels on multiple PRTG instances.
• Pause, acknowledge alarms, trigger scans, run device auto-discovery, etc. You can do a lot of things with the app that you can over the web interface or the Enterprise Console, with an interface tailored to your mobile device.
• QR code scanning makes it easy to jump directly to a sensor.
• Enhanced notifications can (optionally) alert you in your device's status bar when PRTG finds problems on your network.
• Home screen widgets (available only on 4.1 or higher, sorry!) allow you to keep an eye on your network without the app running in the foreground.
• Network tools such as ping, traceroute, and DNS lookups are included. We'll be adding more in the future!
To use this app, you need to run an installation of PRTG Network Monitor 14.1 or later that is accessible from the network your device is connected to. If you don't have a PRTG Network Monitor installed, you can still try a demo account, and the network tools are completely independent and don't require any PRTG server to operate.
Running an older version of Android or an older PRTG release? You can still use our previous release, PRTGdroid: https://play.google.com/store/apps/details?id=com.paessler.prtg
Required Permissions:
• INTERNET - Rather critical :-)
• CAMERA - Required for the QR scanner.
• WAKE_LOCK - Necessary for the alert functionality. Don't worry, we put a lot of effort into keeping our battery and network use as low as possible.
• Notifications can optionally VIBRATE your phone.
• We use ACCESS_NETWORK_STATE and ACCESS_WIFI_STATE to check if the internet is available, and to determine whether or not we should load large graphs (we don't load them when you're on a mobile data network).
• WRITE_EXTERNAL_STORAGE is needed to cache certain data.
• RECEIVE_BOOT_COMPLETED lets us set notifications back up after a reboot.
If you have any problems or suggestions, we're happy to hear them. Just send us an email at support@paessler.com.
PRTG برای آندروید به ارمغان می آورد قدرت رابط PRTG شبکه مانیتور به آندروید 4.0+ دستگاه های خود را. از آن نیاز به نصب و راه اندازی PRTG 14.1 یا بالاتر. اگر هر اشکالات شما روبرو می شوند، لطفا آنها را ارسال به support@paessler.com، به عنوان ما از نظرات جدید مطلع نیست.
امکانات عبارتند از:
• دید کامل را به حالت خود را پروب، گروه، دستگاه، سنسور، و کانال در موارد PRTG متعدد.
• مکث، اذعان آلارم، اسکن ماشه، دستگاه اجرا خودکار کشف، و غیره شما می توانید بسیاری از مسائل با برنامه انجام دهید که شما می توانید بیش از رابط وب یا کنسول شرکت، با یک رابط مناسب برای دستگاه تلفن همراه خود را.
• کد QR اسکن را آسان می کند به پرش مستقیم به یک سنسور.
• پیشرفته اطلاعیه می تواند (اختیاری) شما هشدار در نوار وضعیت دستگاه خود را در هنگام PRTG مشکلات می یابد در شبکه شما.
• ویدجت صفحه اصلی (فقط در 4.1 یا بالاتر، متاسفم!) اجازه می دهد تا شما را به نگه داشتن چشم در شبکه خود را بدون برنامه در حال اجرا در پیش زمینه.
• ابزار شبکه مانند پینگ، traceroute، و جستجوها DNS را شامل می شوند. ما می شود اضافه کردن بیشتر در آینده!
برای استفاده از این برنامه، شما نیاز به اجرای نصب و راه اندازی PRTG شبکه مانیتور 14.1 و یا بعد از این است که در دسترس از شبکه دستگاه شما به آن وصل. اگر شما لازم نیست که PRTG شبکه مانیتور نصب شده است، شما هنوز هم می تواند یک حساب آزمایشی امتحان کنید، و ابزار شبکه کاملا مستقل هستند و هیچ سرور PRTG نیاز نیست به کار گیرند.
در حال اجرا از نسخه قدیمی آندروید و یا انتشار مسن تر PRTG؟ https://play.google.com/store/apps/details؟id=com.paessler.prtg: شما هنوز هم می تواند نسخه قبلی ما، PRTGdroid استفاده
دسترسی مورد نیاز:
• اینترنت - بلکه مهم:-)
• CAMERA - مورد نیاز برای اسکنر QR.
• WAKE_LOCK - لازم برای قابلیت هشدار. نگران نباشید، ما تلاش زیادی به نگه داشتن باتری ما و استفاده از شبکه به عنوان کم که ممکن است قرار داده است.
• اطلاعیه اختیاری می توانید گوشی خود را به ارتعاش.
• ما با استفاده از ACCESS_NETWORK_STATE و ACCESS_WIFI_STATE برای بررسی در صورتی که اینترنت در دسترس است، و برای تعیین اینکه آیا یا نه باید ها نمودار ها تازه بزرگ بار (ما آنها را بار نیست زمانی که شما در یک شبکه داده های تلفن همراه هستیم).
• WRITE_EXTERNAL_STORAGE cache کردن داده های خاص مورد نیاز است.
• RECEIVE_BOOT_COMPLETED ما اجازه می دهد اطلاعیه مجموعه ای به بالا و بعد از راه اندازی مجدد.
اگر شما هر گونه مشکلات و یا پیشنهادات، ما خوشحال به آنها گوش کنید. فقط کافیست با ما یک ایمیل به در support@paessler.com ارسال.